The use of air picks and precautions
Date: Feb. 28, 2024
If you are interested in our products, Please get in contact with us .
Date: Feb. 28, 2024 WhatsApp Send InquiryThe use of air picks and precautions
air pick is a kind of manual pneumatic tool; it uses compressed air neon to push the reciprocating motion of the live package; it makes the head of the pick constantly do impact motion to break hard objects. It is mainly composed of air distribution mechanism, impact mechanism, and pick fiber. The impact mechanism is a thick-walled cylinder with an impact hammer that can do reciprocating movement along the inner wall of the cylinder. The end of the pick fiber is inserted into the front of the cylinder. The rear end of the cylinder is equipped with an air distribution valve box.
air Pick – Operation Regulations
I. Precautions before work
1、Check the safety condition of the working surface and take safety measures.
2、Check the air volume and blow the dirt in the rubber air pipe.
3、Check whether the air filter of the hose joint and the fixed steel sleeve of the head of the hose are clean.
4、Check whether the end of the air pick and steel sleeve is skewed and whether the gap is suitable.
5. Scrub the end of the air pick first, then insert it into the air pick and fix it with the spring.
II. Precautions during work
1、When the air pick is in use, it should be refueled at any time. When refueling, pour the oil into the hose pipe to prevent the wind draft from falling or the impact of the air pick from hurting people.
2、When the air duct joint and connecting tube are loose and fall off at any time, they should be twisted and tightened in time, and the high pressure straight through must be fastened with U-shaped clamps, and wire cannot be used instead of U-shaped clamps.
3、Keep the air pipe intact, do not make the air pipe curl, and strictly prevent the gangue and other things to break and cause air leakage. 4、Avoid the air pick fiber being stuck in the main rock, the air pick fiber must be inserted into the rock depth under the spring of the wind draft, and it is strictly prohibited to use the wind pick to pry the rock while playing.
air pick – maintenance and repair precautions
1、Before using the air pick, oil the air pick for lubrication;
2、When using air picks, there should be no less than 3 spare picks, and each pick should not last longer than 2.5h.
3. Hold the pickaxe handle and press it tightly in the direction of chiseling so that the pickaxe braze is strongly against the braze sleeve;
4、Choose a suitable inner diameter air inlet pipe and ensure that the pipe is clean and the connection of the air pipe is firm and reliable;
5、When operating, do not insert the pick into the broken object to prevent the air blow; 6、When the pick is stuck into the broken object, do not shake the pick vigorously to avoid damage to the machine body;
7、During operation, choose the chisel bit reasonably. According to the hardness of the broken object, choose a different chisel bit. The harder the broken object, the shorter the pick and drill, and pay attention to check the heating of the shank to prevent the pick and drill from being stuck;
8、If the pickaxe has a hairy mouth, deal with it in time, do not use a hairy mouth pickaxe;
9、Forbid to beat empty.
Previous:How to maintain the steel ribs of the rock drill body due to wear and tear
Next:What type of rock drill is the T38 70MM firearms thread drill used on?
Send us a message
You can also send a message to us by this email sales@sdkdrillingtools.com, we will reply to you within 24 hours. Now tell us your needs, there will be more favorable prices!