How to use B22 mining rod

Date: May. 07, 2024

When using B22 mining rods (or any type of mining drill pipe), certain steps and precautions need to be followed to ensure safe and effective drilling operations. The following are general usage guidelines:

Preparation work:
Check if the drill pipe is intact and undamaged, especially if the threaded part is worn or damaged.
Ensure compatibility and compatibility between drill pipes and drilling equipment.
Prepare necessary tools and spare parts, such as lubricating oil, seals, etc.
Installation of drill pipe:
According to the operation manual of the drilling equipment, install the B22 mining rod onto the drilling equipment.
Pay attention to the correct alignment and tightening of the threads to ensure a secure connection of the drill pipe.
Use appropriate lubricants to reduce thread wear and friction.
Start drilling:
Before starting drilling, ensure that all safety equipment (such as protective covers, safety helmets, etc.) is correctly worn.
Follow the instructions in the equipment operation manual and apply pressure and rotational force slowly and evenly.
Monitor various parameters during the drilling process, such as drilling pressure, rotation speed, torque, etc., and adjust them as needed.
Maintenance and upkeep:
During the drilling process, regularly check whether the connection of the drill pipe is tight and replace damaged or worn parts in a timely manner.
Clean the surface and threaded parts of the drill pipe from debris and dust to maintain its good working condition.
Regularly lubricate and maintain drill pipes to extend their service life.
Disposal of waste:
After drilling is completed, dispose of waste and debris in accordance with relevant laws and regulations.
Properly handle used drill pipes and accessories to ensure environmental safety.
Notes:
During operation, avoid excessive pressure or rotation speed to prevent drill pipe breakage or damage.
When performing maintenance and upkeep, ensure that the equipment is turned off and the power is disconnected to avoid accidents.
When using chemical lubricants or cleaning agents, follow relevant safety regulations and preventive measures.
Please note that the above guidelines are general recommendations, and the specific operating steps and precautions may vary depending on the equipment model, working environment, and job requirements. Therefore, before using the B22 mining rod, please refer to the user manual and safety guidelines of the relevant equipment, and operate under the guidance of professional personnel.